Linkpro-VoIP, Wireless, Fiber, Ethernet Switch, Powerline, IP Camera,

Interfaces
■Parallel: 1 DB-36-pin male Centronic port, supporting bi-directional communication
■LAN: Compliant with IEEE 802.3/802.3u standard, 10/100Mbps auto-sensing, RJ-45 (UTP) connector

Key Software Specification
■Easy-to-use Setup Wizard
■ Network Operating System Support: Windows 95/98/98SE/Me, Windows NT 4.0/2000/XP, Mac OS 8.1 or higher, UNIX/Linux, NetWare (Bindery/NDS)
■Network Protocol Support: TCP/IP, IPX, NetBEUI, AppleTalk, LPR, SMB over IP
■Internet Printing Protocol (IPP) Support
■Windows Print Monitor Technology
■DHCP (client) Support
■Default IP Address: 192.168.010; DHCP: off
■DHCP (client) Support: Yes
■Default IP Address: 192.168.0.10; DHCP: off
■Print Job Log: Yes
■Management:
1. Web interface
2. Windows-based Setup Program
■Software Upgradeable:
1. Web interface
2. Windows-based Setup Program
3. TFTP
■SNMP & HP Web JetAdmin Support
■Email Alert
■Print Job Control/ Print Job Status
■Rendezvous


	PS-160A : 1 Parallel Port Print Server

CPU
■High-performance RISC-cored SoC processor
■Winbond ARM7-based W90N740

Flash
■1MBytes

System Memory
■2Mbytes SDRAM

Parallel Port
■1 DB-36-pin male Centronics port, supporting bi-directional communication

LAN Port
■10/100Mbps, auto-sensing, RJ-45(UTP) connector

LED Lights
■Power/Status: Orange color
a. When powered on, it flashes for the P.O.S.T.
b. When in Upgrade Mode, it flashes slowly.
c. When being upgraded, it flashes quickly.
d. When printing, it flashes quickly.
■LAN Link: 10Mbps(Yellow)/100Mbps(Green)
a. When the cable (network connectivity) is OK, it goes on.
b. If the cable (network connectivity) is NOT OK, it goes off.
c. When data is in transmission (Tx/Rx), it flashes quickly. Load Default Button

Dimension:
■55.5 (Length) x 52 (Width) x 22 (Height) mm

Power Supply
■ 3.3V, 2A

Weight
■52g (Device Only)

EMI Certifications
■CE / FCC Class B

Temperature
■Operating : 0 ~ 50 ℃
■Storage ℃ ：-5 ~ 65 ℃

Humidity
■Operating : 0 ~ 70%
■Storage：0 ~ 80%