Linkpro-VoIP, Wireless, Fiber, Ethernet Switch, Powerline, IP Camera,

■Compliant with IEEE 802.3Z Gigabit Ethernet Standard

■One design operating is 3.3V

■IEC60825-1 Standard

■IEEE802.3 Rev.5.4 Standard

■Hot Swappable

■metal housing Interface

■Plug & Play

■EMI Standard; ROHS

■SFP form factor with LC duplex connectors


	MGB-M05 : SFP, Duplex LC Connector, 850nm

Absolute Maximum Ratings:

recommended Operating conditions:

PARAMETER	SYMBOL	MIN	TYP	MAX	UNITS	NOTE
Ambient Operating Temperature	T_AMB	0		+70	°C
Supply Voltage	V_cc	3.15		5.25	V

Transmitter Electro-optical Characteristics:
(V_cc= 3.15V to 3.45V, T_A = 0°C to +70°C)

PARAMETER	SYMBOL	MIN	typ	MAX	UNITS	NOTE
Data Rate	B		1250		Mb/s
Output Optical Power ) ( 62.5 mm core diameter MMF)	Pout	-9		-3	dBm	Average
Receiving Optical Power Overload) Sensitivity)	Pout	-17		-3	dBm	Average

Extinction Ratio	ER	9			dB
Center Wavelength	l_C	830	850	860	nm
Spectral Width (RMS)	Dl			0.85	nm	RMS
Rise/Fall Time	T_r/T_F			260	ps
Relative Intensity Noise RIN @1.25GHz				<-117	dB/Hz
Extinction Ratio	er	9			dB
Total Jitter				227	ps	PRBS 2⁷-1
Output Eye Mask	Compliant with IEEE 802.3z
Transmit Data Input Voltage - High	V_ISH	Vcc-1.2		Vcc-0.9	V
Transmit Data Input Voltage - Low	V_ISL	Vcc-1.9		Vcc-1.6	V
Transmit Disable Input Voltage - High	V_IH	2		V_CC+0.3	V
Transmit Disable Input Voltage - Low	V_IL	0		0.8	V
Transmit Fault Output - High	V_TOH	Vcc-0.5		Vcc+0.3	V
Transmit Fault Output - Low	V_TOL	0		0.5	V
Supply Current	I_cc			250	mA	The whole module.
Power Consumption	P			863	mW	The whole module.

receiver Electro-optical Characteristics:
(V_cc= 3.15V to 3.45V, T_A = 0°C to +70°C)

PARAMETER	SYMBOL	MIN	typ	MAX	UNITS	NOTE
Data Rate	B		1250		Mb/s
Sensitivity			-23	-17		BER <10-12
Average Max. Optical Input Power	P_{IN max}	-3	0		dBm	BER <10-12
Center Wavelength	l_C	770		860	nm
Optical return Loss	ORL	12			dB
Signal Detect - Asserted	P_A		-24	-22	dBm
Signal Detect - De-asserted	P_D	-30	-28		dBm
Signal Detect - Hysteresis	P_A – P_D	1	4		dB
Signal Detect - Assert Time	T_SD+			100	ms
Signal Detect - De-assert Time	T_SD-			100	ms
Data Output Rise/Fall Time	T_R/T_F			260	ps
RX Loss Output Voltage - High	V_OH	Vcc-0.5		Vcc+3.0	V
Rx Loss Output Voltage - Low	V_OL	0		0.5	V

X. PCB Layout and Bezel Recommendation